Ladder and clamps

Tube Clamps

THE DESIGN OF STRUCTURES & INSTALLATION

Cable clamps are an important element. Designers should be glad on the fitness for purpose of such a construction and should seek advice from the present releases of the subsequent standards or parameters, as applicable:-

Stated design parameters must be used for all the type of cable clamps. Pin joint assumptions should be created for all fittings except those specifically classified as fastened joints: varieties 132, 152, 144, 145, 134 or 146. Cross bracing could also be needed to make sure the steadiness of structures, especially racking, and to protect from accidental impact, for example from forklift trucks.

EN 14122 (Safety of machinery)

Note: National standards also apply:

BS 5395 (Stairs, ladders, and walkways);

BS5950-1 (Structural use of steelwork in buildings);

BS 6180 (Barriers in and about buildings);

BS 6399 (Loading for buildings);

BS 7818 (Pedestrian restraint systems).

Building rules elements K & M and reports issued from time to time by the Health & Safety govt.

Cable clamps are a type of cable clamps. It can not be avoided by a construction source.

Cable Ladder

Cable ladders are also one of cable accessory. It is necessary for big firms like factories, organizatios...etc. For proper alignment of cables without any disturbances to others, it is important.

Cables can be laid through the ladders. that's why it is known as cable ladders. cable trays are also a type of cable ladders. It is commonly available in all over the world. It is available in all sizes. we can make it is custom size also.

Before choosing a cable ladder, we have to make sure it's quality. because it is available in different quality also. If our application is a long-lasting purpose, we should choose good quality material. It will be effective for the whole wiring system also. So be careful before selecting all the elements even if it is a small one.