DutchClamp

Dutchclamp Cable clamps are designed for mounting low, medium and high voltage cables. There are several types of dutchclamp cable clamps. All the type of dutchclamp cable clamps is manufactured using state-of-the-art materials, with polyamide as the main constituent element. This is made up with the specific composition of the raw materials. Therefore these plastic cable clamps become the strongest in the world.

Dutchclamp cable clamps are using widely all over in the world. Many of the industries like wind energy, Oil and Gas and general industries require these products. Industry requirement is simple, low cost, ease of installation and certified solutions for securing cables.

Cable clamp

There is various type of dutchclamp cable clamps, the range of models available for each type of cable clamp ensures a perfect fit. Before it reaches to the consumers it is going through various tests.

These tests are for checking dutchclamp cable clamps characteristics such as mechanical tensile strength, resistant to oils, UV, ozone, salts, moisture, acids, and even radioactive emissions. temperature withstand, installation method, short-circuit withstand ...etc.

SE Clamps

SEG Clamps

Triple Type

Tower Cable Clamp

Dutch hook

Cable Blocks

Trefoil Type Cable clamp

Single Type

SEG Clamp

for short-circuit-proof mounting of single- and multi-conductor cables in a single configuration. This variety of single clamps are stackable, saving you installation space and mounting time. Cable diameter range is 26 - 80 mm.

SE Clamp

for short-circuit-proof mounting of single- and multi-conductor cables in a single configuration. Cable diameter range is 15 - 170 mm

Cable clamps and cable glands

What is a cable clamp? Cable clamp is a mechanical device that is used to hold the cables together by avoiding movements. One of the best brand for cable clamp is Dutchclamp. Cable clamps are available in different sizes and different types. 

Dutchclamp is located in Netherlands. They have different types of cable clamps such as SE type, SEG type, terminal type, triple type cable clamp, ...etc. Dutchclamp cable clamps are little bit expensive while comparing to other brands. The reason for this is the quality. If the industry is giving importance to quality over expenses, there is no other choice than Dutchclamp.

Dutchclamp products are always keeping their quality and standards. Their products are widely used all over the world. Dutchclamp cable clamps and cable blocks are exporting to all the other regions of the world from Netherlands. Saudi Arabia is one of the top country which is always using dutchclamp products.

A wire rope clip, also called a clamp, cable clamp, wire rope clamp, U-Clip, U-Clamp, is used to fix the loose end of the loop back to the wire rope. It usually consists of a U-shaped bolt, a forged or cast saddle and two nuts. Cable clamps are available in different brands with different 

Giant pipes and cables can be clipped by using cable clamps. This helps to avoid inter crossing of cables. Sometimes we need to run the cables for a very long distance. That time these cables or pipes may intercross and make confusions later on the time of troubleshoot or repairing.

Cable clamps can help us in these situations. By using cable clamps we can hold the pipes and cables together by avoiding movements. Cable clamps are made with different kind of materials such as plastic, polyurethane, metal, ...etc. Polyurethane cable clamps are enough strong to hold giant pipes and cables.

Cable Clamp UAE

Cable Clamp UAE

Cable clamps are mechanical devices or clips that define a route for one or more cables along a building wall or within instrumentation, control or another type of electrical enclosure. They provide all the mechanical support required.

Dutchclamp is one of the best brands from the UK for cable clamp products. They introduced large-scale cable clamps for higher-level applications by industries. Smaller-scale cable clamps are also available on the market that is suitable for managing and routing insulated cables along with a PCB board. Some types are often soldered into position alongside other board components, reducing assembly time.

The cable clamps should prevent the cables from becoming sources of obstruction or danger. The path should be aesthetically pleasing and impart a way of order and professionalism to the installation. It should also keep the cables out of harm’s way, without risk of damage from shock, stress, vibrations, human activity, tools or nearby pieces of installed equipment.

Dutchclamp cable clamps are helping to align and hold the cables easily. A clearly-defined cable path that ensures technicians and electricians can easily trace the cables from source to destination for trouble-shooting or identification. It also eliminates the possibility of random inductive coupling and resulting interference problems through cables being left to run close to high-power electrical equipment.

Cable clamps are available in many materials and sizes and may be sized for the diameter of the cable or set of cables they need to accommodate. Various mountings are also available. They should be rated for UL94V-2 flammability resistance, also as resistance to corrosion, fuels, lubricants and other chemicals. They should also be non-conductive.

On the cable clamps market, Dutchclamp got their own place because of the quality and standard of the products they offered to the industries. Their products are tested by the big electrical laboratories around the world.

Dutchclamp UAE

Dutchclamp UAE

Dutchclamp is a Netherland based company. They are offering high-quality cable clamps and cleats. They are Certified in accordance with IEC 61914 international safety standard.  For the mounting of low, medium and high voltage cables, Dutchclamp has been designing and manufacturing innovative cable clamps (cable cleats) and cable blocks since 1982.

The cable clamps have been designed in close collaboration with major energy companies. Dutchclamp is popular around the world because of its quality, service, and reliability.  More than 50 countries around the world using  Dutchclamp cable clamps and cable blocks successfully.

The design

Each cable clamp (cable cleat) provides an exact fit for the necessary short circuit proof mounting of valuable cables. For various sizes of cables, therefore we can say that it is introducing unique designs. Dutchclamp designed different sized cable clamps and cleats.

The raw materials

Dutchclamp cable clamps (cable cleats) are produced from high-quality virgin raw materials, with glass fiber reinforced polyamide as the main ingredient. Dutchclamp cable clamps (cable cleats) are halogen-free and they are self-extinguishing.

Robustness

Dutchclamp cable clamps (cable cleats) are among the strongest in the world because they are made from the specific composition of the raw materials. They are specially manufactured to overcome the harsh forces that occur during short-circuiting and have been tested by various laboratories.

Diversity

Dutchclamp cable clamps are suitable for single and multiple core cables. It is a perfect match with individually mounted, from Ø 12 mm up to 170 mm, and for cables mounted in a triangular configuration, from Ø 27 mm up to 150 mm.

Tests

The Dutchclamp cable clamps (cable cleats) have been tested by the major laboratories such as Volta laboratory in Grenoble (Schneider), KEMA and SGS Brussels, Underwriters Laboratories U.S.A, Prof. Ir. Damstra Laboratory (Eaton), in accordance with international safety standard IEC 61914.

Ladder and clamps

Tube Clamps

THE DESIGN OF STRUCTURES & INSTALLATION

Cable clamps are an important element. Designers should be glad on the fitness for purpose of such a construction and should seek advice from the present releases of the subsequent standards or parameters, as applicable:-

Stated design parameters must be used for all the type of cable clamps. Pin joint assumptions should be created for all fittings except those specifically classified as fastened joints: varieties 132, 152, 144, 145, 134 or 146. Cross bracing could also be needed to make sure the steadiness of structures, especially racking, and to protect from accidental impact, for example from forklift trucks.

EN 14122 (Safety of machinery)

Note: National standards also apply:

BS 5395 (Stairs, ladders, and walkways);

BS5950-1 (Structural use of steelwork in buildings);

BS 6180 (Barriers in and about buildings);

BS 6399 (Loading for buildings);

BS 7818 (Pedestrian restraint systems).

Building rules elements K & M and reports issued from time to time by the Health & Safety govt.

Cable clamps are a type of cable clamps. It can not be avoided by a construction source.

Cable Ladder

Cable ladders are also one of cable accessory. It is necessary for big firms like factories, organizatios...etc. For proper alignment of cables without any disturbances to others, it is important.

Cables can be laid through the ladders. that's why it is known as cable ladders. cable trays are also a type of cable ladders. It is commonly available in all over the world. It is available in all sizes. we can make it is custom size also.

Before choosing a cable ladder, we have to make sure it's quality. because it is available in different quality also. If our application is a long-lasting purpose, we should choose good quality material. It will be effective for the whole wiring system also. So be careful before selecting all the elements even if it is a small one.

Gland and clamp

Tube Clamps

Tube clamps fittings are designed for use with tube produced to EN 39 (scaffold tube), EN 10210-1 (structural steel) as well as ISO 65/BS 1387 (gas tube). When coming up with structures with vertical and horizontal members that cross at intervals a fitting, tube continuity should be maintained for the vertical, unless there is a specific structural reason to do otherwise.

TRANSPORTATION AND STORAGE:

There are not any specific limitations on transportation and storage of fittings apart from they ought to be unbroken during a dry and aired atmosphere.
Tube clamps fittings must not be welded.

JOINING TUBES WITHIN FITTINGS:

The tube clamps should not be joined at intervals any barrel having only 1 grub screw unless initial secured with a kind one hundred fifty splices. De-burring of cut tubes: In order to avoid the danger of cuts or snagging, cut ends must be de-burred, especially when used with types 150 or 133.

NOTE: Combination (swivel) Fittings (167,168,169 and 173) are assembled from “M” (male) and “F” (female) fittings; special directions apply. The 173F fitting is employed within the assembly of all swivels.

Cable Gland

Cable glands are mechanical cable entry devices. They are used throughout a variety of industries in conjunction with cable and wiring utilized in electrical instrumentation and automation systems.

In a big organization or industry, cable-related works are a big concern. There should be huge requirements for cable accessories like cable clamp, cable block, cable ladder, cable gland, cable tray, cable ties, cable printer...etc. Like this, all type of cable accessories is important in these places.

All these elements are commonly available in all places. But we have to check the quality of each product before we choose it. Depends on the application purpose only we can choose the proper elements. Cable glands are also commonly available in the UAE market.

Gland and Tube

Gland and Tube

Cable glands could also be used on all kinds of wattage, control, instrumentation, data, and telecommunications cables. They are used as a protection and termination device to confirm that the characteristics of the enclosure that the cable enters are maintained adequately.

Cable glands area unit manufactured from varied plastics, steel, brass or metal. Glands supposed to resist dripping water or water pressure can embrace rubber or alternative sorts of material seals. Certain sorts of cable glands may additionally serve to forestall the entry of ignitible gas into instrumentation enclosures, for electrical instrumentation in unsafe areas.

Although cable glands unit usually noted as "connectors", a technical distinction is made among the language, that differentiates them from quick-disconnect, conducting electrical connectors.

SPECIFIC LIMITATIONS ON THE USE OF TUBULAR FITTINGS

Types 149 and 150: must not be used to join the top and mid rails within the same bay, not more than one joint is allowed between structural supports. Anchors and fixings of Cable clamps must be specified to take account of the fixture thickness and design loads according to the manufacturer's recommendations. 

Cable clamp fittings are galvanized iron castings and are supplied, as standard, with coated and hardened steel grub screws. They are suitable for use in the construction of tubular structures using standard galvanized steel tubes.

Attention must be paid to the nature, mechanical properties and condition of the civil structure or substrate to which the structure is to be fixed to ensure its ability to withstand the design loads. We must consider the environmental conditions (e.g.: saline, cyclical loads or vibration) which the structure will have to endure in service and the possible implications for service life.

Cable clamps fittings should not be employed in staging applications. Regular inspections to check the integrity and condition of structures and the tightness of grub screws is recommended.

Tube and Gland

Tube Clamps & Glands

Tube clamps fittings are an iron casting and galvanized to BS EN ISO 1461. Selecting a tubeclamps™ fitting is simple. Select the suitable fitting for the application required, select the suitable size of the tube for the application required and combine the 2 reference numbers. I.E. Long Tee to suit forty eight.3 o/d tube = 104D.

General Instructions for the use of Tubular Fittings:

GUIDELINES ON THE USE OF FITTINGS, DESIGN OF STRUCTURES AND INSTALLATION

All grub screws must be tightened to a torque of 39Nm. Always make sure that the pointed, cutting end of the grub screw is placed against the tube and that the flat endpoints away from the tube.

Wherever potential, fittings ought to be assembled with the open faces of grub screws inform down (or horizontally) to reduce assortment and retention of rain, etc.

• don't re-use grub screws; replace with new screws from Tube clamps.

• Do not modify fittings.

• Do not use fittings that are (or appear to be) damaged or defective in any way.

• Do not mix `tube clamp` fittings with other brands, use only genuine fittings to which these instructions relate exclusively.

Cable Gland:

A cable gland (in the U.S. more typically referred to as a wire grip, strain relief, cable connector or fitting) could be a device designed to connect associate degreed secure the tip of a transmission line to the equipment.

A cable secretor provides strain-relief and connects by a way appropriate for the sort and outline of cable that it's designed—including provision for creating an electrical association to the armor or braid and lead or atomic number 13 sheath of the cable if any cable secretors (Cable glands) may additionally be used for protection cables passing through bulkheads or gland plates.

Cable glands are principally used for cables with diameters between one metric linear unit and seventy-five metric linear unit.

trefoil clamps

Trefoil Clamps

The Trefoil Cable Clamps are used for laying single core cables in Trefoil touching formation which helps to maintain magnetic symmetry thereby avoiding electromagnetic heating and loss of current. It nullifies the induced magnetic field of high voltage power cable. Trefoil Clamp FRP is used for high voltage single core cables where the current rating is high and 3 core cables are not available.

The Trefoil cable Clamp FRP is the Protection of power and control cable from the lightning discharges and the Establishment of easy cable circulation paths. Trefoil Clamps are used for top voltage single core cables wherever this rating is high and three core cables aren't accessible.

The Trefoil Clamps area unit used for giving birth single core cables in Trefoil touching formation that helps to take care of magnetic symmetry thereby avoiding magnetic attraction heating and loss of current. It will nullify the evoked field of force of the high voltage power line. IM cable clamps are another type of cable clamps.

The Trefoil cable Clamps are Protection of power and management cable from the lightning discharges and institution of simple cable circulation methods. Voltages are induced within the sheath of cables running in parallel that lead to current currents flowing within the sheaths.

The distances between single core cables running in parallel confirm the voltages evoked. Voltages are induced in the sheath of cables running in parallel which result in circulating currents flowing in the sheaths. The distances between single core cables running in parallel confirm the voltages evoked.

The distances between the cables are minimum while single-core cables in trefoil formation (touching each other)  then the voltages induced are reduced and hence this current. The circulating currents cause localized heating. The Trefoil Cable Clamps area unit Protection of power and management cable from the lightning discharges and institution of straightforward cable circulation ways.

Clamp Types

Clamp Types

Cable clamps are accessories for wire and cable. They are wont to bundle, clip, clamp, label, guide, and defend wires and cables. Clamps play a crucial role in the installation and maintenance of cable systems.

Cable clamps area unit employed in home construction, automotive, rigging, and many more industrial and manufacturing applications. The clamps are available in a wide variety of types and sizes. 

There area unit four common sorts of cable clamps: U-type, edge, parallel, and J-type. U-type- The U-shape clamps also are referred to as right-angle clamps. The support is attached directly to a steel beam via bolts that are threaded and fastened to a flat or curved top piece. U-type clamps area unit typically used once the passage (pipes through that power cables are often run) has to be put in perpendicular to the beam.

IM type cable clamps are also available. Bend kind clamps, such as U-type, are not recommended for wire bundles over 1" diameter as the weight of the wires may exceed the structural capabilities of the clamp. Edge- Edge clamps can attach conduits to the thin edge of steel beams by using jaws to clamp down tightly on the conduit. They are well-suited for perpendicular installations.

When choosing a positioning clamp it's vital to contemplate the load the clamp will support per one hundred units of distance. Parallel- Parallel clamps have 2 jaws: one holds the passage in situ and therefore the alternative, thinner jaw attaches to the steel beam. Parallel clamps are best used when the conduit runs parallel or along the length of the steel beams. IM type cable clamps are also really useful.

J-hook- J-hook cable clamps have a unique 'J' shape which hooks around the conduit. The conduit is mounted on the inside, and then the threaded top of the clamp is attached to the steel beam with a nut or bolt. J-hook cable clamps are often used for parallel and perpendicular applications since the passage is about directly on the beam. IM type cable clamps are mostly used in industries and factories.