Showing posts with label dutchclamp suppliers UAE. Show all posts
Showing posts with label dutchclamp suppliers UAE. Show all posts

Tuesday, 7 September 2021

Cable clamps and cable glands


Cable clamps and cable glands


What is a cable clamp? Cable clamp is a mechanical device that is used to hold the cables together by avoiding movements. One of the best brand for cable clamp is Dutchclamp. Cable clamps are available in different sizes and different types. 

Dutchclamp is located in Netherlands. They have different types of cable clamps such as SE type, SEG type, terminal type, triple type cable clamp, ...etc. Dutchclamp cable clamps are little bit expensive while comparing to other brands. The reason for this is the quality. If the industry is giving importance to quality over expenses, there is no other choice than Dutchclamp.

Dutchclamp products are always keeping their quality and standards. Their products are widely used all over the world. Dutchclamp cable clamps and cable blocks are exporting to all the other regions of the world from Netherlands. Saudi Arabia is one of the top country which is always using dutchclamp products.

dutchclamp suppliers

A wire rope clip, also called a clamp, cable clamp, wire rope clamp, U-Clip, U-Clamp, is used to fix the loose end of the loop back to the wire rope. It usually consists of a U-shaped bolt, a forged or cast saddle and two nuts. Cable clamps are available in different brands with different 

Giant pipes and cables can be clipped by using cable clamps. This helps to avoid inter crossing of cables. Sometimes we need to run the cables for a very long distance. That time these cables or pipes may intercross and make confusions later on the time of troubleshoot or repairing.

Cable clamps can help us in these situations. By using cable clamps we can hold the pipes and cables together by avoiding movements. Cable clamps are made with different kind of materials such as plastic, polyurethane, metal, ...etc. Polyurethane cable clamps are enough strong to hold giant pipes and cables.


Tuesday, 11 February 2020

Cable Clamp UAE


Cable Clamp UAE


Cable clamps are mechanical devices or clips that define a route for one or more cables along a building wall or within instrumentation, control or another type of electrical enclosure. They provide all the mechanical support required.
dutchclamp
Dutchclamp is one of the best brands from the UK for cable clamp products. They introduced large-scale cable clamps for higher-level applications by industries. Smaller-scale cable clamps are also available on the market that is suitable for managing and routing insulated cables along with a PCB board. Some types are often soldered into position alongside other board components, reducing assembly time.

The cable clamps should prevent the cables from becoming sources of obstruction or danger. The path should be aesthetically pleasing and impart a way of order and professionalism to the installation. It should also keep the cables out of harm’s way, without risk of damage from shock, stress, vibrations, human activity, tools or nearby pieces of installed equipment.
cable clamps UAE
Dutchclamp cable clamps are helping to align and hold the cables easily. A clearly-defined cable path that ensures technicians and electricians can easily trace the cables from source to destination for trouble-shooting or identification. It also eliminates the possibility of random inductive coupling and resulting interference problems through cables being left to run close to high-power electrical equipment.

Cable clamps are available in many materials and sizes and may be sized for the diameter of the cable or set of cables they need to accommodate. Various mountings are also available. They should be rated for UL94V-2 flammability resistance, also as resistance to corrosion, fuels, lubricants and other chemicals. They should also be non-conductive.

On the cable clamps market, Dutchclamp got their own place because of the quality and standard of the products they offered to the industries. Their products are tested by the big electrical laboratories around the world.



Monday, 10 February 2020

Dutchclamp UAE


Dutchclamp UAE


Dutchclamp is a Netherland based company. They are offering high-quality cable clamps and cleats. They are Certified in accordance with IEC 61914 international safety standard.  For the mounting of low, medium and high voltage cables, Dutchclamp has been designing and manufacturing innovative cable clamps (cable cleats) and cable blocks since 1982.
dutchclamp UAE
The cable clamps have been designed in close collaboration with major energy companies. Dutchclamp is popular around the world because of its quality, service, and reliability.  More than 50 countries around the world using  Dutchclamp cable clamps and cable blocks successfully.

The design
Each cable clamp (cable cleat) provides an exact fit for the necessary short circuit proof mounting of valuable cables. For various sizes of cables, therefore we can say that it is introducing unique designs. Dutchclamp designed different sized cable clamps and cleats.


The raw materials

Dutchclamp cable clamps (cable cleats) are produced from high-quality virgin raw materials, with glass fiber reinforced polyamide as the main ingredient. Dutchclamp cable clamps (cable cleats) are halogen-free and they are self-extinguishing.

dutchclamp uae

Robustness
Dutchclamp cable clamps (cable cleats) are among the strongest in the world because they are made from the specific composition of the raw materials. They are specially manufactured to overcome the harsh forces that occur during short-circuiting and have been tested by various laboratories.


Diversity
Dutchclamp cable clamps are suitable for single and multiple core cables. It is a perfect match with individually mounted, from Ø 12 mm up to 170 mm, and for cables mounted in a triangular configuration, from Ø 27 mm up to 150 mm.


Tests
The Dutchclamp cable clamps (cable cleats) have been tested by the major laboratories such as Volta laboratory in Grenoble (Schneider), KEMA and SGS Brussels, Underwriters Laboratories U.S.A, Prof. Ir. Damstra Laboratory (Eaton), in accordance with international safety standard IEC 61914.




Saturday, 8 June 2019

Ladder and clamps



Tube Clamps

THE DESIGN OF STRUCTURES & INSTALLATION

Cable clamps are an important element. Designers should be glad on the fitness for purpose of such a construction and should seek advice from the present releases of the subsequent standards or parameters, as applicable:-
cable clamp suppliers UAE
Stated design parameters must be used for all the type of cable clamps. Pin joint assumptions should be created for all fittings except those specifically classified as fastened joints: varieties 132, 152, 144, 145, 134 or 146. Cross bracing could also be needed to make sure the steadiness of structures, especially racking, and to protect from accidental impact, for example from forklift trucks.

EN 14122 (Safety of machinery)
Note: National standards also apply:
BS 5395 (Stairs, ladders, and walkways);
BS5950-1 (Structural use of steelwork in buildings);
BS 6180 (Barriers in and about buildings);
BS 6399 (Loading for buildings);
BS 7818 (Pedestrian restraint systems).
Building rules elements K & M and reports issued from time to time by the Health & Safety govt.

Cable clamps are a type of cable clamps. It can not be avoided by a construction source.

Cable Ladder

Cable ladders are also one of cable accessory. It is necessary for big firms like factories, organizatios...etc. For proper alignment of cables without any disturbances to others, it is important.
cable ladder suppliers UAE

Cables can be laid through the ladders. that's why it is known as cable ladders. cable trays are also a type of cable ladders. It is commonly available in all over the world. It is available in all sizes. we can make it is custom size also.

Before choosing a cable ladder, we have to make sure it's quality. because it is available in different quality also. If our application is a long-lasting purpose, we should choose good quality material. It will be effective for the whole wiring system also. So be careful before selecting all the elements even if it is a small one.



Gland and clamp


Tube Clamps


Tube clamps fittings are designed for use with tube produced to EN 39 (scaffold tube), EN 10210-1 (structural steel) as well as ISO 65/BS 1387 (gas tube). When coming up with structures with vertical and horizontal members that cross at intervals a fitting, tube continuity should be maintained for the vertical, unless there is a specific structural reason to do otherwise.
cable clamp suppliers UAE
TRANSPORTATION AND STORAGE:

There are not any specific limitations on transportation and storage of fittings apart from they ought to be unbroken during a dry and aired atmosphere.
Tube clamps fittings must not be welded.

JOINING TUBES WITHIN FITTINGS:

The tube clamps should not be joined at intervals any barrel having only 1 grub screw unless initial secured with a kind one hundred fifty splices. De-burring of cut tubes: In order to avoid the danger of cuts or snagging, cut ends must be de-burred, especially when used with types 150 or 133.

NOTE: Combination (swivel) Fittings (167,168,169 and 173) are assembled from “M” (male) and “F” (female) fittings; special directions apply. The 173F fitting is employed within the assembly of all swivels.

Cable Gland


Cable glands are mechanical cable entry devices. They are used throughout a variety of industries in conjunction with cable and wiring utilized in electrical instrumentation and automation systems.
cable gland suppliers UAE

In a big organization or industry, cable-related works are a big concern. There should be huge requirements for cable accessories like cable clamp, cable block, cable ladder, cable gland, cable tray, cable ties, cable printer...etc. Like this, all type of cable accessories is important in these places.

All these elements are commonly available in all places. But we have to check the quality of each product before we choose it. Depends on the application purpose only we can choose the proper elements. Cable glands are also commonly available in the UAE market.



Tuesday, 28 May 2019

Gland and Tube



Gland and Tube

Cable glands could also be used on all kinds of wattage, control, instrumentation, data, and telecommunications cables. They are used as a protection and termination device to confirm that the characteristics of the enclosure that the cable enters are maintained adequately.
cable gland suppliers UAE
Cable glands area unit manufactured from varied plastics, steel, brass or metal. Glands supposed to resist dripping water or water pressure can embrace rubber or alternative sorts of material seals. Certain sorts of cable glands may additionally serve to forestall the entry of ignitible gas into instrumentation enclosures, for electrical instrumentation in unsafe areas.

Although cable glands unit usually noted as "connectors", a technical distinction is made among the language, that differentiates them from quick-disconnect, conducting electrical connectors.

SPECIFIC LIMITATIONS ON THE USE OF TUBULAR FITTINGS

Types 149 and 150: must not be used to join the top and mid rails within the same bay, not more than one joint is allowed between structural supports. Anchors and fixings of Cable clamps must be specified to take account of the fixture thickness and design loads according to the manufacturer's recommendations. 
cable clamp suppliers UAE
Cable clamp fittings are galvanized iron castings and are supplied, as standard, with coated and hardened steel grub screws. They are suitable for use in the construction of tubular structures using standard galvanized steel tubes.

Attention must be paid to the nature, mechanical properties and condition of the civil structure or substrate to which the structure is to be fixed to ensure its ability to withstand the design loads. We must consider the environmental conditions (e.g.: saline, cyclical loads or vibration) which the structure will have to endure in service and the possible implications for service life.

Cable clamps fittings should not be employed in staging applications. Regular inspections to check the integrity and condition of structures and the tightness of grub screws is recommended.


Monday, 27 May 2019

IM type cable clamps




Trefoil



Trefoil Cable Cleats are suitable for supporting Single Core PVC/ HRPVC, XLPE, XLPE Insulated Aluminum, un-armored, Earth And Un-Earth Power Cables from 1.1 Kv to 132 K V Grade. 3 Phase A.C. Circuits in trefoil formation in Sub-Stations, Thermal Power Stations, and Switchgear Plants.

trefoil cable cleat suppliers UAE


These are often used for indoor or out of doors for vertical or horizontal running cables within trenches or on racks.


Dynamic multi-cable trefoil cable cleats unit of measurement store-bought with metal alloy (LM6) base through die casting methodology and stainless-steel straps, which might be wont to fasten single, two, three or bundle of cables in trefoil formation. Straps square measure provided to suit serious duty cables and length is adequate for multi-loops. The cleats square measure appropriate to face up to 40KA - 50KA short testing and cleats.

Trefoil cable cleats are used for laying three single or multi-conductor low, medium or high voltage cables (Armored or Un-Armored) in triangular configurations. Trefoil touching formation helps to avoid electromagnetic heating and loss of current and maintain magnetic symmetry.

IM type Cable clamps:

IM type cable Clamps: suitable for all applications requiring at least three cables with diameter 12 to 32 mm. The mounting holes are Ø13 millimeters, permitting the rib bolts to be extended at any desired location, thereby eliminating the chance of injury once cables are put in multiple layers. 
im type cable clamp suppliers UAE
Existing configurations can be expanded at any time easily and simply. It is are modular. It can be expanded at a reduced cost. The SEG, TRIPLE and IM type cable clamps are stackable. Cable blocks are available in different configurations, depending on your needs it can be supplied.


Hardware used in cable clamps: all the cable clamps like SE, SEG, and IM type cable clamps can be delivered with the necessary mounting hardware (nuts, bolts, and washers), in galvanized or stainless steel. cable clamps and blocks can be delivered pre-mounted upon request.



Saturday, 25 May 2019

trefoil clamps



Trefoil Clamps


The Trefoil Cable Clamps are used for laying single core cables in Trefoil touching formation which helps to maintain magnetic symmetry thereby avoiding electromagnetic heating and loss of current. It nullifies the induced magnetic field of high voltage power cable. Trefoil Clamp FRP is used for high voltage single core cables where the current rating is high and 3 core cables are not available.

cable clamp suppliers UAE

The Trefoil cable Clamp FRP is the Protection of power and control cable from the lightning discharges and the Establishment of easy cable circulation paths. Trefoil Clamps are used for top voltage single core cables wherever this rating is high and three core cables aren't accessible.

The Trefoil Clamps area unit used for giving birth single core cables in Trefoil touching formation that helps to take care of magnetic symmetry thereby avoiding magnetic attraction heating and loss of current. It will nullify the evoked field of force of the high voltage power line. IM cable clamps are another type of cable clamps.

The Trefoil cable Clamps are Protection of power and management cable from the lightning discharges and institution of simple cable circulation methods. Voltages are induced within the sheath of cables running in parallel that lead to current currents flowing within the sheaths.
cable suppliers UAE

The distances between single core cables running in parallel confirm the voltages evoked. Voltages are induced in the sheath of cables running in parallel which result in circulating currents flowing in the sheaths. The distances between single core cables running in parallel confirm the voltages evoked.

The distances between the cables are minimum while single-core cables in trefoil formation (touching each other)  then the voltages induced are reduced and hence this current. The circulating currents cause localized heating. The Trefoil Cable Clamps area unit Protection of power and management cable from the lightning discharges and institution of straightforward cable circulation ways.





Clamp Types



Clamp Types


Cable clamps are accessories for wire and cable. They are wont to bundle, clip, clamp, label, guide, and defend wires and cables. Clamps play a crucial role in the installation and maintenance of cable systems.

Cable clamps area unit employed in home construction, automotive, rigging, and many more industrial and manufacturing applications. The clamps are available in a wide variety of types and sizes. 
cable clamp suppliers UAE
There area unit four common sorts of cable clamps: U-type, edge, parallel, and J-type. U-type- The U-shape clamps also are referred to as right-angle clamps. The support is attached directly to a steel beam via bolts that are threaded and fastened to a flat or curved top piece. U-type clamps area unit typically used once the passage (pipes through that power cables are often run) has to be put in perpendicular to the beam.

IM type cable clamps are also available. Bend kind clamps, such as U-type, are not recommended for wire bundles over 1" diameter as the weight of the wires may exceed the structural capabilities of the clamp. Edge- Edge clamps can attach conduits to the thin edge of steel beams by using jaws to clamp down tightly on the conduit. They are well-suited for perpendicular installations.
IM type cable clamp suppliers UAE
When choosing a positioning clamp it's vital to contemplate the load the clamp will support per one hundred units of distance. Parallel- Parallel clamps have 2 jaws: one holds the passage in situ and therefore the alternative, thinner jaw attaches to the steel beam. Parallel clamps are best used when the conduit runs parallel or along the length of the steel beams. IM type cable clamps are also really useful.

J-hook- J-hook cable clamps have a unique 'J' shape which hooks around the conduit. The conduit is mounted on the inside, and then the threaded top of the clamp is attached to the steel beam with a nut or bolt. J-hook cable clamps are often used for parallel and perpendicular applications since the passage is about directly on the beam. IM type cable clamps are mostly used in industries and factories.




Friday, 1 March 2019

Dutch Hook



Dutch Hook


Dutch Hook is a small equipment developed by Dutchclamp Netherland. It is used to pull something from one side to another side. It is normally used for rigging a tarp and can be used with a continuous rigid line. 
dutchclamp dutch hook
Normally Dutchclamp dutch hooks are made of titanium. But they are really strong. It is a tiny element with approximate weighs of 0.4 grams. This little element is enough stronger to hold up to the strongest winds. Environmental changes will not much effect on the surface of the dutch hook. It can withstand almost all the climates. Titanium is a strong element. There are no worries about corrosion also.

The dutch hook is to the webbing suspension. Here I would like to share one interesting thing. In Dutch history, there is a good example of the dutch hook application. In Dutch, their houses are tall and narrow. Also, they have tight and narrow staircases. By using these staircases, it is impossible to navigate when moving furniture and other large items upstairs.

Their cities are some times under the flood. If a city is filled with canals or floods, upper floors were the secure places to store items that could easily be ruined by flooding. Therefore they installed dutch hooks outside of the houses.
dutchclamp suppliers UAE
Each house has a large arm and a dutch hook stick out from the top. By using this dutch hook furnitures and other items could be tied and pulled up to the respective floors. 

It is easy to transfer items by using Dutch Hooks. One of the best hook manufacturers is the Dutchclamp company. They are established in 1982. And one of the best and authorized suppliers of Dutchclamp products including dutch hook in UAE and all over the world are FAS Arabia LLC, Dubai. They are supplying all the types of Dutch hook and clamp solutions.



Finding the Right VFD in the UAE

Finding the Right VFD in the UAE: A Guide to Industrial Motor Control Industrial equipment depends on reliable motor performance to keep pro...