Connectors

8P8C is short for "eight positions, eight conductors", and so an 8P8C modular cable lug (connector or jack) is a modular connector with eight positions, all containing conductors. The connection is maybe most renowned for its use in LAN and wide used on CAT5 cables.

The 8P8C standard cable lugs and jacks look terribly kind of like the plugs and jacks used for FCC's registered jack RJ45 variants, although the specified RJ45 socket is not compatible with 8P8C modular plug connectors.

Cable Lug

It neither uses all eight conductors (but only two of them for wires plus two for connecting a programming resistor) nor does it fit into 8P8C because the true RJ45 is "keyed".

Cable lugs are commonly available all over the world. It is a small element but it is important in the construction fields as well as in organizations.

The D-sub-miniature family of electrical cable connectors is employed in many alternative applications, for computers, telecommunications, and test and measurement instruments.

A few examples are RS-232 serial port on modems and IBM-compatible computers; monitors (MGA, CGA, EGA, VGA cable connector); the Commodore 64, MSX, Apple II, Amiga, and Atari joysticks and mice; game consoles like Atari and Sega; and laptop parallel ports.

Combo D-subminiature that have massive expanse (LSA) contact system that's for low contact resistance and saves energy, and sequential mating options.

Power Connectors

Power connectors should shield individuals from accidental contact with energized conductors. Power connectors typically embody a security ground affiliation also because of the power conductors. In larger sizes, these connectors must also safely contain any arc produced when an energized circuit is disconnected or may require interlocking to prevent opening a live circuit.

Cable connectors and cable plugs are the essential things in industries. There is a lot of manufacturers and suppliers all over the world. You can choose the item depends on your requirement.

cable termination kit and cable lugs

Cable Termination Kit & Cable Lugs

According to the type of cable, type of connector and application, the ways used to terminate the cables will be different. The common types of cable terminations can be classified as:

• Crimp connection
• Soldered connection
• Compression termination
• Wire-wrapping connection
• Direct connection
• Loop or eye connection.

Electrical cable terminations can be classified as four: chip, coaxial, SCSI, and waveguide. To terminate and connect 11kV/33kV cables into medium or high voltage electrical equipment we can use cable termination kit. These electrical equipment can be switchgear, transformer, motor, enclosure or pole-top mounted for overhead line distribution networks.

How to connect a termination kit? We can start by making a straight cut in the end of the cable. Then place the connector ferrule over the end of the cable. To meet the required cable diameter and stripping requirements adjust the two- or three-step coax stripping tool. 

To connect cables into any electrical appliances or with other cables or surfaces or mechanisms, we can use cable lugs. At the end of the cable terminal kits, we can connect either cable lugs or cable glands to connect it with the devices or cables or machines. One example for the cable lug is the clamps that connect wires to an automotive battery.

Cable lugs can also used to connect fuse sockets, load switches and electrical appliances other than for connecting cables and power lines. Cable lugs are basically three types. One is Plain type. This plain type cable lug is used for general purpose seamless electrical terminals which are not required any installation characteristics.

Another one is mechanical cable lugs. They are available bolted with two screws or with four screws. And the final one is compression lugs or grounding lugs. This lug is welded to a massive structure at one end. The other end contains a hole. When we are using this, a bolt will be placed through the hole of the cable lug.

Cable Lugs and Cable Cleats

A cable lug is really important when you are trying to connect with a machine or device to a cable. But before buying a cable lug from any local suppliers, you should know whether the crimping tool that you have is compatible or not? Cable lugs should be properly crimped, otherwise, it will make an increase in joint resistance, creating heat and in the worst case, a fire.

A hexagonal crimp form is a preferred style for most installers. It looks neat and creates a good connection. To create a perfect result (OD & ID) a hexagonal crimp is very size specific to the diameter of the cable lug. The crimp will not compress enough if the Cu tube size is smaller than that of the designed die.

If the Cu tube is too large, the crimp will create a flash or ‘ears’ on the side of the connector. Sometimes, the installer will file these off which reduces the amount of Cu in the lug and creates a high resistance connection. When a suitable system is used only all the cable lugs can be crimped properly.

Cable Cleats

Cable cleats are used to hold the cables together to avoid unwanted movements. A wide range of cable cleats is available. Specifically designed cable cleats for use within industrial areas and hazardous locations are also available. 

Cable cleats are used for many different big level applications such as rail, underground, oil and gas, mining, and petrochemical. They’re the perfect accompaniment to our extensive range of cable glands. They are available in different sizes and styles.

The range is tested in accordance with IEC 61914 to ensure that, regardless of the cable formation used on the installation, there is a suitable cable cleat. as a commonly available device in the market, cable cleats are available with different quality and prices also. But always choose the best quality if you need it for a long term project.

Cable gland

Cable Gland

A Cable gland is a type of connector. They are also known as a cord grip cable connector or fitter. It is a small element designed to connect and secure the end of an electrical cable to the equipment.

There are two types of cable glands. Single compression and double compression cable gland. Normal glands are single compression cable glands. These are mainly used for light-armored cables. This means the compression will affect only one place, that is at the cable armor only. Normally these cable glands are called weather-proof cable glands. While double compression cable glands are mainly applying to the heavy armored cables entering or exiting the panel.

Another type of cable gland is EMC cable glands. EMC cable glands are the Electro-Magnetic Cable Glands. They are used for electromagnetic protection, mainly in the applications which involve shielded cables. By just tightening the gland, they help to maintain electromagnetic integrity of the shielded cable. When tightening the gland, it enables a special spring, which is placed inside the gland to come in contact with the cable braiding. By this method, it is used for electromagnetic protection.

Cable lugs are also known as Cable terminal ends or cable shoes. Cable lugs are electrical supplies utilized to securely connect or terminate cables to electrical devices, power or control panels, junction boxes, equipment, and machinery. These lugs are often used to join power cables together as well.

Electrical lugs are used when the permanent connection is not possible between devices or cables. The use of cable lugs allows in easy installation, repair, and maintenance of electrical devices or cables. Usually, one end of the electrical lug is used for connecting a cable to an electrical device.

Multiple wire strands are used for making cables, while wires consist of a single strand. Suitable type cable lugs are used for both cables and wires. One end of a cable lug is normally used for connecting a cable, which could be soldered, welded, or crimped depending on the type.