Showing posts with label Fastener suppliers UAE. Show all posts
Showing posts with label Fastener suppliers UAE. Show all posts

Thursday, 24 November 2022

Band-IT Fasteners

 

Band-IT Fasteners


You can see Band-IT products from subsea applications to aerospace applications. Band-IT offers high-quality stainless non-corrosive products. Band-IT provides the solution for mission-critical aerospace fastening solutions when failure isn't an option. It is a trustful brand in the market all over the world.
Band-IT UAE
Band-IT
BAND-IT solutions excel in the thermal cycle, thermal shock, high vibration, and corrosive atmospheres. Band-IT products exhibiting high retained force, high loop tensile strength, capable and quick installation tools, low installed cost, long service life. Therefore Band-IT fasteners and other products are the best choices between the industrial people.

We had customers looking to secure a braiding product to the back of our connector, so we found BAND-IT. They had unique expertise with clamping and created a product solution that has now become the default. High heat-resistant fastening solutions for critical automotive components.

From the hot end of an exhaust system to the deployment of a side curtain airbag, BAND-IT® has supplied its customers with the most capable automotive fastening solutions for their demanding applications. We look at BAND-IT fasteners as problem solvers, we don’t just look at them as a provider of a part. We turn to them as a partner when we have problems and our customers have problems.

For your next-generation vehicle, to terminate critical HV cable harness EMI/RFI/EMC shield applications, Band-IT provides better clamping solutions. Although automobiles rarely get struck by lightning the way airplanes do, the ability to design systems that can survive in the harshest environments, on and off the earth, is what sets BAND-IT's band clamping solutions apart.

With 3 decades of EMI/RFI shield termination dominance in the mil/aero industry, band-it brings that experience and expertise to the automotive industry for the shielding of high voltage cables. Band-IT fasteners provide good solutions for industrial purposes. It is suitable for indoor and outdoor applications.


Clamping Solutions from Band-IT

 

Clamping Solutions from Band-IT


Band-IT offers good quality for all the products and it provides the highest safety. BAND-IT worked more to bring years of automotive supplier experience in safety products, e.g. side curtain airbags, as well as holding heat shields to the hottest manifolds in vehicle exhaust systems.
Band IT UAE
Band IT
BAND-IT began serving the automotive HV cable market in 2007 and has supplied millions of clamping solutions to many of the largest and most well-known cable harness manufacturers in the Hybrid and Electric Vehicle Industry, shielding the OEM’s products from electrical interference that could damage components and render vehicles inoperable.

Band-IT offers high-quality fasteners and clamping solutions. Band-IT fasteners are cost-effective and non-corrosive. Once we purchased any of the Band-IT product we don't want to be worried about the quality and lifetime of it. It can withstand any harsh environment. Therefore it becomes part of subsea or marine applications as well as aerospace applications.

Band-IT fasteners are made from strong material. It will not destroy due to climate changes. Band-it introducing the best clamping solution for normal as well as for industrial purposes. Band-IT cable harness clamping solutions provide:

Tamper Resistance: Other solutions like plastic/nylon ties or pinch-ear type clamps are easily removed. High clamping force: two or more times the strength of competing for clamp technologies. Band-IT fasteners have secure locking to prevent shielding from being accidentally or inadvertently pulled away from the connector. Designed for high volume applications: Minimizes ergonomic and repetitive injury concerns with capable installation power tools and maximizes throughput at the assembly level.

Robust Strength: Our clamping solutions are manufactured from Type 304SS for high strength and excellent corrosion resistance, other grades of stainless are available to meet OE needs across the automotive industry. Whether you are a cable harness manufacturer or the specifying OEM, contact BAND-IT for solutions to protect your OEM’s critical operating systems.


Monday, 14 November 2022

High Quality Fasteners - BAND-IT

 

High Quality Fasteners - BAND-IT


BAND-IT’S 3/8” TIE-LOK® tie does the trick for smaller and lighter EGR coolers currently being installed on light duty and passenger vehicles. Currently holding a lot of heat shields on these vehicles from the maniverter to the muffler and each pipe in between, TIE-LOK® Ties have proven themselves capable of surviving an extremely harsh environment.
Band IT UAE
Band IT
TIE-LOK® Ties bring that pedigree to the EGR cooler application to enable mounting bracket attachment without welding and welding’s many weaknesses in these harsh environments. Band-it specializes in attaching irregular shapes, vibration, thermal cycling, and corrosion resistance. These challenges and many more have been solved for many of the largest OEMs in the world.

We can be found on products and vehicles built by Boeing, Airbus, JPL, NASA, Lockheed Martin, General Motors, Ford, FCA, Nissan, Audi, Mercedes Benz, Caterpillar, Halliburton, Schlumberger, and many more. Band-IT fasteners are used in the tr-343 transducer assembly. Band-it ultra-lok® alloy 625 clamps protect rubber boot on tr-343 transducer elements.

Let's see one of the applications of Band-IT Fasteners. A key component of sonar systems for surface military vessels is the AN/SQS-53C Sonar array, made up of 576 TR-343 Transducers, the array is located in the "bulb" on the bow just below the water surface. Each of these transducers contains a gumboot or sleeve secured with an ULTRA-LOK Alloy 625 band.

Band-it fasteners identified as the only source for some of the specific applications. During the sourcing process, the United States Navy identified BAND-IT because of the only responsible source capable of providing the specified supplies. For specific applications, specific measurements and tolerances are required. Band-IT products can meet all these parameters by the skilled manufacturing processes.

Citing the potential for delays and non-recovered costs, the agency chose BAND-IT because the only approved manufacturer supported performance and testing requirements of the Critical Item Production Fabrication Specifications (CIPFS) for the Transducer.


Tuesday, 21 January 2020

Band-IT Marine Applications



BAND-IT Marine Applications


Band-IT offers high-quality products for marine applications. As we know marine products should withstand in harsh environments or in climate changes without any damages. Even it should be inactive with the saltwater. Marine banding and fastening solutions are specially designed for harsh marine environments.

Band IT UAE


Because of the quality and manufacturing capabilities, BAND-IT can meet the challenges of the marine environment by using special materials that are designed for fresh and saltwater applications. BAND-IT provides High-quality, high-performance off-shore clamping systems for harsh-duty ocean applications.

No matter the ocean, water depth, or platform, BAND-IT has the solutions ready to satisfy all of your fastening needs, even in the harshest and most demanding environments. BAND-IT uses materials specially designed for ocean applications where prolonged submersion is required. Our global presence can deliver wherever you need a shipyard fastening solution.

With three manufacturing locations globally, BAND-IT fasteners can satisfy the constant high volume demand from shipyards because of sustainable stocked inventory levels of product solutions. Our global locations are ready to meet the growing demand of your new and reconditioned ships, submarines and aircraft carriers.
band it fasteners

BAND-IT® BAND: 201 STAINLESS STEEL BAND

This is the quality choice of BAND-IT fasteners, offering very high strength, clean appearance and good resistance to oxidation and weathering. This non-magnetic material is that the choice for municipal and industrial markets. Now with Easy Scale, a patented imprint on the band to work out band length. Eliminates costly waste and complex measuring by allowing users to quickly and precisely roll out the length of the band needed for any clamp.



201 Stainless Steel offers good resistance to oxidation and a lot of moderate corrosive agents. Band-IT fasteners can be utilized in the general use of banding applications. It may be used with clip style buckles to make band clamps. Packaged during a standard box or a durable plastic tote for better dispensing.

Finding the Right VFD in the UAE

Finding the Right VFD in the UAE: A Guide to Industrial Motor Control Industrial equipment depends on reliable motor performance to keep pro...