Cleat and junction box

Cleat and Junction box

Cable cleat is a device designed to provide securing of cables when installing at intervals along the length of cables. A cable cleat is provided with a means of attachment to the mounting surface, however, it doesn't rely on an unspecified mounting surface for the retention of the cables.

Examples of mounting surfaces that may be specified are a ladder, tray, strut, or rail, wire, and beam. Where declared, cable cleats offer resistance to mechanical device forces. cable retentive device to be used with cable cleats to carry the cables along so as to supply resistance to mechanical device forces.

Intermediate restraints are not attached to the mounting surface. Cable cleats provide the necessary levels of resistance to electromechanical forces, where declared and in addition achieve the following safety measures. Support cables and conductors. cut back the mechanical load the cable could also be exposed to below its own weight. cut back the mechanical load the cable termination could also be exposed to.

Junction Box:

A junction box is an enclosure that protects an association (the junction) of 2 or additional wires carrying electrical current. When upgrading the wiring for a room, you may find it necessary to tap into a wire to add a branch circuit for light or outlet. You'll need a junction box if you cannot build the connections within an existing electrical box.

Smart Junction Boxes. Lear's industry-leading sensible Junction Box (SJB) integrates passive junction box options with electronic module practicality. It uses microcontroller-based technology to modify power and management vehicle body functions. S3JB technology reduces weight and packaging size up to 80%.

Overfilling a Junction Box. Cramming too several wires into a junction box isn't solely dangerous, but it's against the National Electrical Code. Plastic junction boxes are sealed with their approved volume; you'll need to calculate the amount of a steel box on your own.