Band IT Clamping Solutions

Band-IT Clamping Solutions

QTEQ has chosen pre-cut Band-IT clamping solutions to reduce hand injuries.

QTEQ employees were facing difficulties to cut the clamps for the specific uses. Finally, they approached Band-IT for a good solution to the sharp edges that were the results of cutting roll band to length. Band-IT offered pre-cut BAND-IT Clamps with seals. It is cost-effective and providing high quality for the life-time. Replacement or reinstallation is not required.

If the employees are cutting the bands as per the length on the live spot, it will be too much complicated. Pre-cut Band-IT clamps had a smoother finished edge than the bands cut to length on-site. Pre-cut band-IT clamps reduced helped to save the time of employees. While the bands were more expensive to purchase, the benefits were immediate.

Zero hand injuries reported from QTEQ after switching to the new banding with more than 300,000 units installed safely. 30% reduction in glove wear rate due to the reduced abrasion in the pre-cut Band-IT clamp. This product can be saved 20 minutes from every installation. By the way, there must be a big difference in the complete installation time. 

Installation: xe4809 from pneumatic combination tool. BAND-IT recommends the XE4809 Fromm tool which tensions, seals, and cuts the bands for installing the 3/4" (19mm) BAND-FAST bands with seals. Plastic cable ties can't withstand harsh environments. Therefore, stainless steel cable ties developed by Band-IT. and stainless steel cable ties replaced plastic ties in a harsh environment.

Band-it cable ties made from high-quality metals. Due to the highly-corrosive atmosphere, as even 304 stainless steel is subject to rust after an extended period, the conditions in the refinery complex are unique. Because of this, the specific requirement was for high-strength, durable clamping solutions to cater for these challenging conditions. At first, the company was using plastic cable ties for the facility’s electric cables. Plastic cable ties are proved not durable in the harsh operating environment.

Over a five-month period, Banding & ID Solutions Africa has been upgrading the tying system used on the cables at the refinery complex using a mixture of reusable Band-It cable ties. To date, it has supplied about 10,000 reusable Band-It cable ties to the company.

Band-IT Tie-Lok Ties

Band-IT Tie-Lok Ties

What makes tie-lok better?

Various grades of stainless steel are used for making it, Tie-Lok ties expand and contract with the thermal cycles of the exhaust. BAND-IT fasteners also use more noble metals within the tie composition that resists attack from road salts and other de-icing chemicals. And because BAND-IT provides complete solutions, they developed the IT Tool system, a pneumatic banding tool that creates installing Tie-Lok ties simple, precise and consistent.

Let's look at the process and economics. Welding calls for greater technical skills (and the associated salary), more capital investment in equipment, requires a hot work permit and yearly inspection, and a lot more energy. Band-IT fasteners are safer for workers, faster to install and not subject to environmental regulation. Warranty claims are virtually eliminated, which not only saves money in the long-run but enhances the manufacturer’s reputation for reliability.

Tie-Lok Ties help ensure that heat shields protect components and profits

The proven performance of Band-IT fasteners is where the rubber meets the road. In this application that’s the “hot end” of the exhaust system. Only solutions made with select materials under exacting manufacturing tolerances can meet the 10-year 100,000-mile survivability threshold and emissions requirements for auto manufacturers. BAND-IT gets you there.

The problems with attaching irregular shaped parts or fabric (sock) shields solved with band clamps. Band-IT’s heat resistant, high strength, corrosion, vibration, clamping systems replace welding and welded bolt-clamps.

Where the above stresses result in broken welds, failed assemblies and warranty repairs, BAND-IT’s ULTRA-LOK® employed in large commercial vehicle diesel applications shrugs off all those environmental realities thriving in an environment for which it is perfectly suited.

Band-IT can solve all the problems related to fastening difficulties. The best clamping solutions are offering them. It has Marine and aerospace approval. Even  NASA also trusting them to use Band-IT products for their aerospace fastening applications.

Band-IT Intelligent Clamping Solutions

Band-IT Intelligent Clamping Solutions

Band-IT offers Dual-lokt® intelligent clamping system secures the #1 position for safety restraint leader. The 2030 Agenda for Sustainable Development includes a target to reduce road traffic deaths and injuries by 50% by 2020. Commented by World Health Organization.

Airbag systems in vehicles today take passenger safety to a new level of effectiveness. For the number one safety restraint company in the world, a cutting-edge installation system ensures that airbags deploy and protect as designed, and faster and easier installation creates a competitive differentiator. Band-IT clamping solutions offer it.

The mother of development is a necessity

In addition to the simple fact that people prefer to buy safer vehicles, industry regulations put pressure on auto manufacturers to develop safety solutions that reduce traffic deaths and injuries. We need to understand why Band-IT clamping solutions are better. The National Highway Traffic Safety Administration stipulates that side airbags need to deploy in less than 1/20th of a second. Current airbag deployment designs can meet that requirement.

Unfortunately, the industry-standard airbag clamping system capabilities are exceeded by those designs. That problem sent Band-IT to the drawing board. Airbags in automobiles were introduced in the late 1960s. In 1995, Volvo began offering side airbags and torso side protection airbags as an option on its 850 models.

What makes dual-lokt better?

Based on the customer's requirements, BAND-IT developed the patented Dual-Lokt Intelligent Band-IT Clamping System. The speediest, most accurate and ergonomic installation airbag clamp system in the world. The Dual Lokt Clamp is the heart of the solution, that exhibits extreme diameter reduction, 2 1/2 times greater loop tensile strength than the competitor’s system. It is manufactured with materials chosen for optimal performance and price.

Band-it also invented an installation system. It’s managed by a programmable logic controller (PLC), that provided never-before achieved control and accuracy in the installation process. The system set a new global standard for a clamping system installation on Automotive Safety Products.

Band IT Fasteners

Band-IT Fasteners

You can see Band-IT products from subsea applications to aerospace applications. Band-IT offers high-quality stainless non-corrosive products. Band-IT provides the solution for mission-critical aerospace fastening solutions when failure isn't an option. It is a trustful brand in the market all over the world.

BAND-IT solutions excel in the thermal cycle, thermal shock, high vibration, and corrosive atmospheres. Band-IT products exhibiting high retained force, high loop tensile strength, capable and quick installation tools, low installed cost, long service life. Therefore Band-IT fasteners and other products are the best choices between the industrial people.

We had customers looking to secure a braiding product to the back of our connector, so we found BAND-IT. They had unique expertise with clamping and created a product solution that has now become the default. High heat-resistant fastening solutions for critical automotive components.

From the hot end of an exhaust system to the deployment of a side curtain airbag, BAND-IT® has supplied its customers with the most capable automotive fastening solutions for their demanding applications. We look at BAND-IT fasteners as problem solvers, we don’t just look at them as a provider of a part. We turn to them as a partner when we have problems and our customers have problems.

For your next-generation vehicle, to terminate critical HV cable harness EMI/RFI/EMC shield applications, Band-IT provides better clamping solutions. Although automobiles rarely get struck by lightning the way airplanes do, the ability to design systems that can survive in the harshest environments, on and off the earth, is what sets BAND-IT's band clamping solutions apart.

With 3 decades of EMI/RFI shield termination dominance in the mil/aero industry, band-it brings that experience and expertise to the automotive industry for the shielding of high voltage cables. Band-IT fasteners provide good solutions for industrial purposes. It is suitable for indoor and outdoor applications.

Band IT Applications

Band-IT Applications

Band-IT is one of the best brands in the United Kingdom. They are offering fastening solutions to industrial purposes. From the subsea to the aerospace, the application level of Band-IT fasteners are expanded. Band-IT provides Municipal clamping systems for indoor and outdoor traffic management applications. Highly durable and non-corrosive stainless steel clamping solutions at the best price in the industry.

From sign installations to traffic cameras, BAND-IT has the properly engineered the fastening solution to satisfy the biggest municipal applications globally. BAND-IT features a complete line of traffic management products to hold signage, traffic signals, directional signs, banners, traffic monitoring systems, communication boxes, motion sensors, and traffic cameras.

For subsea or marine applications and aerospace applications, Band-IT fasteners are engineered specifically. Because these areas will always face harsh environmental conditions. Therefore Band-IT offers corrosion-resistant materials and custom engineered solutions for aerospace, marine, industrial, and automotive.

BAND-IT supplies proven solutions for the most demanding customers in the world, Ford, GM, NASA, Boeing, Airbus, Nissan, Mercedes Benz, Polaris ATV’s & Motorcycles. As a supplier to the Mil-Aero Industry, BAND-IT fasteners and other products are precisely designed and manufactured to handle the harshest conditions in and out of this world.

There are many criteria to choose a better clamping or fastening solutions. Corrosion, thermal shock, vibration resistance, speed of installation, high strength set the standard for critical applications...etc. It depends on the application behavior we need to choose the solution. Therefore Band-IT fasteners are the most popular in this field.

As a Tier One supplier to the automotive industry, BAND-IT manufactures solutions for Air Bags, Air Intakes, Boots, EGR Coolers, EMI/RFI Shield Terminations, and Exhaust Heat & Sound Shields for global OEM’s. With 3 decades of EMI/RFI Shield termination dominance in the MIL/AERO Industry, BAND-IT is bringing that experience and expertise to the automotive industry for the shielding of high voltage cable.

Band IT on Government Level Applications

Band-IT on Government Level Applications

BAND-IT offers Simple, permanent solutions for frac iron recertification and identification programs. For frac iron recertification, asset management, and other visual identification programs BAND-IT colored bands can be used. Whether you need to create an RFID-integrated band, custom marked band, or color-matched band to a nonstandard color, their experienced team will partner with you to help solve your identification needs.

BAND-IT COLOR-IT® technology resists weathering and color fading, with 16 stocked colors available for same-day delivery and custom powder coating available for non-standard colors. BAND-FAST® preassembled band and clips provide a secure, quick installation.

Our flow iron equipment wears out from fracking operations, so we test, refurbish, & recertify our components. If it's approved, we put a band on it, and the BAND-IT fastener is durable enough to stay on and withstand heat, cold, and corrosion.

INSULATION CLAMPING SYSTEMS

BAND-IT brand products are essential for use in the oil & gas industry. A wide variety of material grades are available to ensure the right level of protection is applied under extreme/harsh environments. Use BAND-IT fasteners to attach insulation jacketing or other various pipeline attachments.

HARSH-DUTY ENGINEERED FASTENING SOLUTIONS FOR GLOBAL GOVERNMENT AGENCIES

BAND-IT solutions can be used for military communications, planes, satellites, ships, subs, tanks and transports. Because it is highly durable and inactive to climate changes. So it can withstand harsh environments also. From the day you place the order to the day you take a BAND-IT product off - for the entire life of the product - you don’t have to think about it. It’s going to work.

BAND-IT product solutions satisfy the municipalities, military, infrastructure, and institutional environments. Therefore they are supplying to global government agencies. Band-IT fasteners are suitable for military attachment solutions for mission-critical applications. BAND-IT product solutions are perfect to fasten, secure, band, bundle, clamp or identify an application.

Band IT Clamping Solutions

Band-IT clamping solutions

Band-IT fasteners can last in the harshest energy applications. BAND-IT products offer high quality, high volume engineered manufacturing to ensure that our fastening solutions perform in extreme onshore, offshore and subsea oil and gas environments to your specifications.

Band-IT energy team is specialists at completing any customer requirement— from product specifications, paperwork compliance, to utilizing our global locations for the quick delivery— they will work with us to ensure total compliance and satisfaction on our project. Band-IT products are available all over the global market at the best price with high quality.

Band-IT has Downhole clamping solutions designed for harsh-duty good environments. The BAND-IT energy team works with our global customers to ensure that BAND-IT fasteners or other products integrate seamlessly across all of their locations. Manufactured using materials specifically for harsh-duty environments.

Band-IT fasteners can see everywhere that requires high-quality clamping solutions. BAND-FAST® and coil fastening solutions can be used to attach artificial lift, downhole oil and gas applications, such as ESP cables, control lines, capillary tubes, fiber optic lines, and intelligent completions. Corrosion-resistant subsea clamping solutions that will last the lifetime of your project.

BAND-IT BAND-FAST® and coils are used to fasten many different types of subsea applications including VIV strakes, fairings, pipelines, risers, buoyancy modules, piggyback blocks, guides and saddles, pier and piling, umbilicals, esp cables, capillary tubes, and reservoir monitoring systems. In our corrosion-resistant materials— Zeron® 100, Alloy 625, Titanium, and 316 stainless steel, the cable ties and hose clamps are also available.

Band-IT specializes in matching corrosion-resistant materials to their large selection of fastening products to meet our project specifications. They feature Zeron®100 as a lower-cost material replacement to Alloy 625. BAND-IT offers offshore and subsea customers the ability to get rid of their expensive high-cost band and coil inventory and use BAND-IT for on-demand, high volume engineered fastening production.

Band-IT Marine Applications

BAND-IT Marine Applications

Band-IT offers high-quality products for marine applications. As we know marine products should withstand in harsh environments or in climate changes without any damages. Even it should be inactive with the saltwater. Marine banding and fastening solutions are specially designed for harsh marine environments.

Because of the quality and manufacturing capabilities, BAND-IT can meet the challenges of the marine environment by using special materials that are designed for fresh and saltwater applications. BAND-IT provides High-quality, high-performance off-shore clamping systems for harsh-duty ocean applications.

No matter the ocean, water depth, or platform, BAND-IT has the solutions ready to satisfy all of your fastening needs, even in the harshest and most demanding environments. BAND-IT uses materials specially designed for ocean applications where prolonged submersion is required. Our global presence can deliver wherever you need a shipyard fastening solution.

With three manufacturing locations globally, BAND-IT fasteners can satisfy the constant high volume demand from shipyards because of sustainable stocked inventory levels of product solutions. Our global locations are ready to meet the growing demand of your new and reconditioned ships, submarines and aircraft carriers.

BAND-IT® BAND: 201 STAINLESS STEEL BAND

This is the quality choice of BAND-IT fasteners, offering very high strength, clean appearance and good resistance to oxidation and weathering. This non-magnetic material is that the choice for municipal and industrial markets. Now with Easy Scale, a patented imprint on the band to work out band length. Eliminates costly waste and complex measuring by allowing users to quickly and precisely roll out the length of the band needed for any clamp.

201 Stainless Steel offers good resistance to oxidation and a lot of moderate corrosive agents. Band-IT fasteners can be utilized in the general use of banding applications. It may be used with clip style buckles to make band clamps. Packaged during a standard box or a durable plastic tote for better dispensing.

Band-IT Fasteners

Band-IT Fasteners

Band-IT fasteners are the most favorite ones in between industrial people. Ther are many reasons for that. The main thing is Band-IT fasteners are high-quality products and non-corrosive. Band-IT products are always cost-effective and eco-friendly. It can be used indoor as well as for outdoor applications.

Band-IT can be seen everywhere from marine or submerge applications to aerospace applications. It is non-corrosive and it can withstand at any harsh climate, therefore, we can use it for indoor and outdoor purposes. It will not react with atmospheric changes in the space as well as it is inactive with saltwater. So trustfully it can be used for all these purposes.

Innovative fasteners for food & beverage processing requirements

With an understanding of the requirements and challenges facing the Food and Beverage industry, BAND-IT provides solutions for the preservation, filling, fermentation, sanitation and identification processes.

High-quality band clamp solutions for particular applications & tolerances in manufacturing

BAND-IT’s goal is to satisfy every customer with the right solution for their application every day. To do this, BAND-IT works directly with steel mills to ensure the highest quality of raw material is ordered every time. Band-IT fasteners are designed for every type of application. Additionally, BAND-IT inspects each delivery for correct materials and specifications to form sure production is consistent and sustainable.

Tough attachment solutions for mining's harsh duty environments

The harsh duty environments found in the mining industry have proven to be the ideal place for BAND-IT fasteners. Areas like drainage, machinery, processing, and maintenance require fast, easy, permanent solutions that also are corrosion-resistant. Whatever the application, BAND-IT has a solution.

For your telecommunications global network infrastructure, reliable engineered fastening solutions.

BAND-IT® fasteners are used in a variety of communications applications to mount, hang and secure cable runs and equipment to antenna towers. BAND-IT supplies engineered fastening solutions with a growing telecommunications industry, that help continues to create the worldwide network infrastructure, outdoor poles, and towers.

Band IT scru-seal clamping

Band-IT Scru-Seal Clamping

BAND-IT offers high-quality products to solve all the fastening requirements. Highly durable and non-corrosive products make Band-IT on the top of the market. More than products, it’s about helping customers find the right industrial solution for their application needs.

BAND-IT takes pride in its industrial roots by having standard products that serve everyday needs, while our engineering staff is ready to take on new challenges to deliver satisfaction. BAND-IT: a brand name you can count on when you need it done right. High-quality stainless steel clamping solutions for industrial purposes.

In the world of construction, every project is different from the last one. Building materials change, supply chains grow, and workers continue to become more knowledgeable in what works and what doesn’t work. As construction complexity continues to grow, BAND-IT’s product solutions will continue to stay relevant, sustainable and viable with the changing applications.

Scru-seal clamping system

Band-IT offers a high-quality scru-seal clamping system. It is a stainless steel clamping system. BAND-IT® Scru-Seal Kit uses a rack and pinion system allowing the user to form a clamp in any size. The kit offers complete flexibility for use in almost any application. Form clamps of any diameter from a continuous roll of band and tension using only a screwdriver.

A rack and pinion system used with the band to create any size clamp. Components are individually packaged rack and housing and band for flexibility. Stainless steel clamping offers very good resistance to the mild atmosphere, fresh-water, and the sun's Ultra Violet rays. An adjustable worm drive, screwdriver clamp is often made with any band cutter and a screwdriver. It can be re-tensioned at any time.

BAND-IT is one of the favorite Brands for industrial people. Because of its high-quality and durability. Band-IT products are always cost-effective. Band-IT products are available all over the world.

Band IT Mini Brack-it Mounting Hardware

Band-IT Mini Brack-it Mounting Hardware

Choosing the right products for your application can be the difference between success and failure. At BAND-IT they understand the importance of quality, value, and service. That's why they design and manufacture for performance in every standard and custom-designed solution. Band-IT specially designed for outdoor applications.

Although technology and innovation have changed the world during the last 80 years, what hasn’t changed is the need to put two components together. BAND-IT products are now being used in more harsh-duty applications around the world than they ever thought possible. From marine to aerospace applications, Band-It products are applicable.

When performance is critical, BAND-IT’s experience and expertise help companies solve the challenges of today and imagine the possibilities of the future. With a dedicated team of engineers on staff, BAND-IT is committed to developing a solution for your custom application.

Mounting Hardware:

Mounting hardware is used to mount traffic signs, security devices, and enclosures. Mini Brack-it mounting hardware is one of the simple and high quality mounting hardware from Band-IT. It can withstand stress and wind vibration with specialty designed reinforcement ribs. Based on the application, there are different mounting hardware on the market.

Band-IT mini brack-it mounting hardware is fully threaded to solidly anchor attachment bolts. It is having hex head bolts with metal and fiber washer, and it doesn't require any nuts. It can be applied with BAND-IT® Band and Buckles, BAND-FAST®, VALU-STRAP™, VALU-STRAP Plus™, or Ultra-Lok® Systems.

Band-IT mounting hardware is highly durable and it is suitable for outdoor applications. It can withstand in all the harsh environments. There are different types of mounting hardware available on the market. But we should choose it based on the behavior of our application. Even Band-IT is offering a variety of mounting hardware. It is reliable. Per box 50 pieces are available from Band-IT.

Band IT

Band-IT

You can see BAND-IT everywhere, on space shuttles, underwater cabling, energy pipelines, and on top of mountains. They are on military applications like planes, choppers, submarines, tanks, and jeeps. They are also on your domestic vehicles. They hold up traffic signs and signals, and we have traveled to Mars.

It is very little that BAND-IT can't connect, but they are ready to engineer a fastening solution specific to your application - from the ocean floor to the cosmos. Although technology and innovation have changed the world during the last 80 years, what hasn't changed is the need to put two components together.

BAND-IT stainless steel band clamps and fastening products are now getting used in additional harsh-duty applications around the world than ever thought possible. When performance is critical, BAND-IT's experience and expertise help companies solve the challenges of today and imagine the possibilities of the future.

Band-IT Stainless steel Cable Ties

BAND-IT® Mini Tie-Lok® stainless steel cable ties offer a unique, patented dimple lock with a smooth ID and a low profile. This is a fast, consistent and reliable clamp. Band-IT cable ties are using in different industries from automotive to cable bundling.

304 Stainless steel Cable ties offer very good resistance to the mild atmosphere, fresh-water, and the sun's UV rays. When the cable ties are installed with the A92079 Tie-Lok II tool can withstand forces above 250 pounds. It can form a low profile single wrapped assembly to secure ID Tags, CV Boots, cables, hoses, and filter bags.

Stainless steel cable ties are highly durable. It can have a long-lasting life without any damages. Even for outdoor applications, it is suitable. Band-IT offers products that are suitable for indoor as well as outdoor applications. They can withstand any harsh environments. They have marine approvals. Because the products are non-corrosive and it can even use in salty waters. 

Band IT stainless steel cable ties

Band-IT stainless steel cable ties

BAND-IT provides steel band fastening solutions for a vast majority of industries worldwide. With solutions tailored to meet the specific needs of the transportation, energy, industrial, marine, and government markets, BAND-IT has many product solutions to fit most applications.

Whether you need a product that is corrosion-resistant in saltwater conditions or can withstand intense heat and pressure, BAND-IT has the solution to meet the needs of your industry-specific application. For outdoor applications as well as for indoor applications, they have proper solutions.

A BAND-IT representative is ready to help always. Send your question and they will make sure to respond promptly. They have industry experts to help you learn more about how to solve your problems and add value to your product with BAND-IT solutions. There are some good suppliers all over the world for Band-IT. They can also assist you with the product, pricing, and technical questions.

Band-IT is having a variety of products such as Adjustable clamping systems, Band & buckle, Banding systems, Mounting hardware & brackets, Identification systems, Preformed clamps, Stainless steel cable ties, Banding Tools, and Accessories

Stainless steel cable ties

One of the best products from Band-IT is stainless steel cable ties. There are different types of cable ties that are suitable for outdoor and indoor purposes. These cable ties are highly durable and reliable. It is corrosion-resistant. Therefore even we can use it for marine applications as well as for aerospace applications.

TIE-LOK^® TIES

One of the types of stainless steel cable ties is Tie-Lok ties. Band-IT Offering a unique dimple lock with a smooth ID and a low profile, Tie-Lok® ties provide fast, consistent and reliable clamping tension. It can be used in industries and applications, like automotive, cable bundling and identification.

The features of Tie-Lok ties are: 

• Strong patented dimple lock-on 3/8" ties
• Locks under full tension - no slipback
• to provide good resistance to mild atmospheres, freshwater, UV rays, and extreme environments, it is available in type 304 and types 316 Stainless Steel 
• 316 Stainless Steel for extreme environments
• To secure cables, hoses, ID Tags, CV Boots, and filter bags forms a low profile single wrapped assembly 

Transformer Breather and Desiccant

Transformer Breather and Desiccant

The function of a breather in the transformer is to filter out the moisture from the air. Breather consists of silica gel which absorbs moisture from the air. When there is overloading on the transformer breather, the winding of the transformer gets heated so the oil in the main tank of the transformer also gets heated. The hot oil started expanding. There is a conservator tank at the top of the transformer which allows adequate space for the expansion of oil. Therefore during the overloading condition the oil move to the conservator tank.

On the transformer breather in normal operating conditions, the oil comes back to the main tank from the conservator tank. Now, there is free space in the conservator tank that is filled with the air. The conservator tank is never completely filled as it has to allow space for expanding oil from the main tank.

The air which is there in the conservator tank is coming from the atmosphere through the transformer breather and breather contains silica gel in it. This silica gel absorbs moisture from the air. The main reason to remove moisture from the air is that the moisture degrades the dielectric strength of the transformer oil.

Desiccant

The desiccant helps to stop the condensation of moisture between the panes. Another use of zeolites is within the dryer component of air-con systems to assist maintain the efficacy of the refrigerant. Desiccants also are commonly accustomed to protect goods in shipping containers against moisture damage.

We recommend that a desiccant get replaced once every three years for open-cycle systems and once every two years for closed-cycle systems. A desiccant may degrade more quickly counting on the environment where it's used. Dew point temperatures offer an honest indication for when to interchange your desiccant

Container Desiccant protects cargo by preventing condensation from occurring in the container. Container Desiccants are manufactured to make safe the cargo from wet damage by preventing condensation in shipping containers (typically referred to as Cargo Sweat, Container Sweat, or Container Rain)