cable termination kit and cable lugs

Cable Termination Kit & Cable Lugs

According to the type of cable, type of connector and application, the ways used to terminate the cables will be different. The common types of cable terminations can be classified as:

• Crimp connection
• Soldered connection
• Compression termination
• Wire-wrapping connection
• Direct connection
• Loop or eye connection.

Electrical cable terminations can be classified as four: chip, coaxial, SCSI, and waveguide. To terminate and connect 11kV/33kV cables into medium or high voltage electrical equipment we can use cable termination kit. These electrical equipment can be switchgear, transformer, motor, enclosure or pole-top mounted for overhead line distribution networks.

How to connect a termination kit? We can start by making a straight cut in the end of the cable. Then place the connector ferrule over the end of the cable. To meet the required cable diameter and stripping requirements adjust the two- or three-step coax stripping tool. 

To connect cables into any electrical appliances or with other cables or surfaces or mechanisms, we can use cable lugs. At the end of the cable terminal kits, we can connect either cable lugs or cable glands to connect it with the devices or cables or machines. One example for the cable lug is the clamps that connect wires to an automotive battery.

Cable lugs can also used to connect fuse sockets, load switches and electrical appliances other than for connecting cables and power lines. Cable lugs are basically three types. One is Plain type. This plain type cable lug is used for general purpose seamless electrical terminals which are not required any installation characteristics.

Another one is mechanical cable lugs. They are available bolted with two screws or with four screws. And the final one is compression lugs or grounding lugs. This lug is welded to a massive structure at one end. The other end contains a hole. When we are using this, a bolt will be placed through the hole of the cable lug.

Cable Tray and Cable Ladder

A cable tray is a bridging system designed to support insulted electrical cables and wires. Also they are used to protect and safely carry cables. Commonly available cable trays in the market are: Ladder Type Cable Tray, Solid Bottom Cable Tray, Trough Cable Tray, Channel Cable Tray, Wire Mesh Cable Tray, and Single Rail Cable Tray.

Cable trays are available in different sizes and in different materials. They are different in shapes as well. Cable trays are making with different materials such as galvanized steel, aluminum, stainless steel and glass-fiber reinforced plastic.

Cable trays are normally available in sizes such as 50x25 mm, 100x25 mm, 150x50 mm, 300x50 mm, 450x50 mm, 600x50 mm, 750x50 mm and 1000x100 mm, and thickness - 3-7 mm. Cable trays are giving mechanical support for electrical cables, raceways, and insulated conductors used for electric power distribution, control, signal instrumentation, and communication.

Cable ladder systems also something similar to cable tray systems. They are also designed for supports for cables and wires. These are not as enclosures giving full mechanical protection. Cable trays are actually entirely different from ladders, walk ways or support for people. They can cause injuries and damage the system and any installed cables.

cable ladder actually looks like a ladder as the name indicates. The main reason for using cable ladders is that it provides more strengthened support for the cables. Cables can be fasten by using cable ladders. They are carrying it all the way with good mechanical support.

The cables and wires should be properly maintained because they are always installing for a long time purpose. Cable trays and cable ladders are a part of this cable management system. They are used to organize the cables properly. Cable ladders and cable trays are providing rigid structures.

Tags and Ties

We all are familiar with cable tags and cable ties. Cable tags are used as an identification method for cables and wires, while cable ties are used as a part of cable management system. Cable tags also coming under cable management as naming of cables can reduce the time and cost while doing any kind of troubleshoot in the future.

We can do printing as well on cable ties and tags. Different types of cables tags are available in the market. As per our requirement we can choose the matched one. Cable tags are available in different sizes and in different colors as well. Mainly it is available in different materials. For various type of applications, this will be really helpful.

If you are using stainless steel cable tags you can do metal engraving, metal embossing, and metal imprinting as well. It is always best to check whether your scanner will acceptably read the tags before and after print and submitting them to your specific environmental conditions.

Cable ties are normally used to hold the cables by avoiding movements. Different colored cable ties are available and different sizes too. From plastic ties to metallic giant cable ties are available in the market.

Usually the pricing is decided by the time duration needed to produce the image on the cable tag. Therefore, for the larger images, the cost will be higher. We can make logos, bar codes, texts in wide variety of fonts. Can be do custom identification also. Each job is unique, so always need to check the pricing individually.

If a bar coded tag is scanning by using a hand held scanner, you can consider decreasing the size of the cable tag to save time and some money. Direct pricing from the factories for these tags can range from 0.35 to 3.50 $ per tag. It is depending on the size, quantity, setup costs, fixture designs and programming costs.

SS Metal Tag 

SS Tags are stainless steel tags, which are used for many variety of applications. It can be used in industries like industrial, military, aerospace, and commercial uses. One of the main advantages of the metal tags is it can be serialized and are great for identification purposes.

Stainless steel tags (SS Tags) may last for a long time that's why they are using for identification purposes such as asset identification tags, valve tags, industrial equipment and device ID, and signages and panels. There are some equipment available in the market to do printing on the tags.

Tag imprinting is a different kind of work from printing on a surface. there are some imprinting tools to print on SS tags. Band IT also providing imprinting tools to print on their stainless steel tags. As it is a reliable and durable material, any industry can go with it without any doubt.

One of the advantage of the stainless steel tag is it will not get oxidized. Laser etching also can be do on SS tags. That means the material is etching with the laser. We can feel the etching with our fingernails. Barcode lines will be etched into the surface of the material. The metal will change color from the base color to white on anodized and colored aluminum.

We can print bar codes on SS tags. We can do either imprinting on stainless steel tags or we can do laser etching. Printed bar codes perform differently than Laser etched bar codes. Because laser etched bar codes means physically etching the bar codes into it and impregnated into the surface of the material.

Laser etched bar coded stainless steel tags are designed to perform in many different conditions. This can give you the benefit of a very durable surface, especially on stainless steel and polyurethane they withstands a great deal of chemical and heat abuse.

cable cleat and cable lug suppliers

Cable Cleats and Lugs

What Are Cable Cleats? Cable cleat can be explained as an equipment designed to give safety of cords when installed at intervals along the length of cords, according to IEC 61914. Cable cleats give resistance to electromechanical forces. Cable cleats are available in different sizes as well as in different materials.

Cable cleats are lines to fix and support the cable and wires. We can securely tie the cables by using cable cleats. It is possible to adjust the size according to the size of the cables and wires. They can give effective short circuit protection, support and retention to LV, MV and HV power string systems when installed at intervals to circuits to secure electrical installations. 

Simply we can say that string cleats are used to secure, fix and route electrical lines in the positions needed in an electrical installation. Cable cleats should help inordinate cable movement due to fault-current glamorous forces. It can play the part of a string fixing unit to avoid movements. 

Cable lugs are bias used for connecting lines to electrical appliances, other lines, shells, or mechanisms. One of the common example of a cable lug is the cable clamps that connect wires to an automotive battery, as the terminals of battery jumper wires. Electrical cable lugs are used when permanent connection isn't possible between electrical devices or wires. 

Cable lugs allows easy installation, form and conservation of electrical equipment or wires. Most common use of cable lugs is connecting one cable with another cable or connection more than two wires. Cable lugs are bias used for connecting lines to electrical appliances, other lines, shells, or mechanisms. 

Cable lugs can be divided into three groups such as Compression cable lugs according to DIN 46235. Tubular cable lugs is one of the common type of  cable lugs and it is available in standard types. Solderless outstations according to DIN 46234. 

Band-IT Band Fast

Band IT is always a better choice for the industrial people who are giving priority to the quality. They have many kinds of products to fulfill the requirements of different types of customers. Additionally they have well determined and qualified designers and engineers to prepare custom made products for the specific requirements of some specific customers.

Band IT is offering high quality products. From their list of products, BAND - FAST® is one of the fast moving product. It has a big level of requirement in-between industrial people. BAND-FAST® is ready to use band. It is prepaid for many kind of works by researching the work requirements.

Band IT band fast is pre-cut and pre-assembled with a clip, buckle or seal. Some times these preassembled band fasts are may not be suitable to your work. But in some cases, these pre-assembled product can helps you to save up to 30% of your time and labor costs for your large projects.

By saving your time and cost you can improve your entire work flow. Therefore BAND - FAST® has a good demand on market. If you want to use band and buckle, or have a requirement for innovative products, BAND-FAST® can perform quickly with less scrap material! 

Band IT fasteners are available in multi colors. They named it as COLOR-IT®. This COLOR-IT Coatings are available in a variety of colors and types. It can provide better performance and it is manufactured with your specific application in mind.

If you go with Band IT COLOR-IT®, you can have a color-matching with decorative light poles, or you can easily identify materials. It helps to match existing hardware on specific projects, if you are choosing COLOR-IT®. They are providing right coating for your project requirements. Custom colors are also available with band fast color-it.

Harness - Fall Protection

The harness attachment points are the obscure hero on a full body harness. Without a way to connect the worker to a fall protection system or harborage point, the full body harness would be useless. Different fall protection operations want different types of connection points. Harness is a part of safety and protection system.

Fall protection outfit will only work duly when it's used rightly. To reduce the abuse of a full body harness, we're going to explain the most common types of harness connection points, where they're located, and how they're meant to serve. Before wearing a full body harness, it is suggested to wear a proper safety dressings.

Although there are numerous different styles of full body harness that are used within the fall protection assiduity, there are some rudiments that are considered harness norms. In utmost cases, harness attachment points will be made out of essence D-rings.

A harness will have connection points grounded on how a company intends to use them. The most common functions of full body harness attachment points are fall arrest, work positioning, trip restraint, descent, evacuation, and graduation climbing.

Depending upon the type of work that needs to be performed at height, it's possible that a full body harness could perform all of those functions, or only one or two of them. The important thing is to know what kind of harness attachment is demanded in order to negotiate those different functions.

A full body harness is a part of rope access system. Rope access system is normally used to reach to the places which is not able to reach easily. For example, If we are unable to reach to the edges and corners of a tall building, we can use rope access technique to access there. Because it is using some equipment along with a rope, not a cradle. Therefore the weight bearing will not effect to the building.