silica Gel and Alumina

Silica Gel and Alumina

As we know activated alumina is used in the purification process of water. It can be used in the initial stage as well as in the final stage. We have to make sure to remove all the contaminated particles from activated alumina before using it as a filter medium for the water purification process.

Let's see the initialization and regeneration procedures. Once a filter has been loaded with virgin activated alumina, the medium is back-washed to remove the fine particles generated by the handling of the material and subsequently chemically treated to activate the adsorption sites and to remove the impurities. The modalities of this treatment are similar to those for regeneration.

The regeneration of activated alumina filters is done in three stages: Treatment with sodium hydroxide to remove fluoride ions and replace them with hydroxide ions; Treatment with an acid to remove residual sodium hydroxide and activate the medium; Rinsing with drinking or demineralized water and conditioning with the natural mineral water so that the filter has no impact on the overall mineral content of the treated water.

Silica Gel

Silica gel is the most used desiccant all over the world. It is used for absorbing moisture from the atmosphere or surroundings of an enclosed area. It can be used to protect packaged food items for a long time by removing moisture presence. There is a lot of industrial uses for silica gel.

In industries, some of the machines required moisture absence to work properly. Such companies or organizations will use silica gel breathers to avoid moisture from it. In these breathers, they are using either orange silica gel or blue silica gel as the desiccant.

There's no expiration date for the silica gel. The gel packets can be dehydrated again once it reached to maximum absorption level. If a silica gel packet left out in the open area will immediately start taking up water vapor from the surroundings because it can absorb moisture from any environment condition.

Band IT Suppliers: FAS Arabia LLC

Band-IT Suppliers

As we discussed in our previous session, Band-IT provides the solution to aircraft manufactures to protect their aircraft and other components from natural effects especially from lightning effects. It can also help to make sure personal safety and provides continuous performance of the aircraft components.

Because it is important to protect the aircraft equipment for a long time, as well as the safety of customers also important. Band-IT tie-dex helped to protect all these. In a single aircraft assembly, as many as 2000 tie-dex bands could be used.

Band-IT is supplying especially to two major aircraft manufactures, Boeing and Airbus. They become the regular client of Band-IT because of the trust in Band-IT products. Each and every product from Band-IT is providing the best quality. They are always keeping their standards and Boeing and Airbus are satisfied in it.

Cable Ties

Cable ties are used to hold the cables or similar products together by avoiding movements. We all may be familiar with cable ties, because it is a common component available on all the markets, even in the supermarkets also. Actually, in some supermarkets, they are used plastic cable ties to tie the mouth of the covers for safety.

Cable ties are available in different colors and in different sizes. Different materials also used to manufacture cable ties. Colored cable ties are mostly plastic ties or nylon ties. They are very cheap and used for general purposes. For different purposes, different types of cable ties are available now.

But for some complicated issues or for big level applications, mainly stainless steel cable ties are used. Aluminum, stainless steel, metals... etc are used as the base material to make cable ties. To hold small wires of computers, land phones or wifi routers nylon cable ties are enough. But to hold big ducts or giant pipes, nylon ties can't be used. We need specific stainless steel or metallic cable ties.

Band IT UAE: FAS Arabia

Band-IT UAE: FAS Arabia

Band-IT provided solutions to most of all the areas of the world. One of the main things is, once they used Band-IT products, then they will not go behind any other substitutes. because Band-IT is offering the best quality. They will keep their standards on every point of each product.

Band-IT Fasteners

Band-IT fasteners are using by two major aircraft manufactures, Boeing and Airbus. Their specialty is, they will take every precaution steps to make sure the aircraft and its components are safe and protected. They will not compromise the quality of each component that they are supplying to military and commercial applications.

Boeing and Airbus are ensuring that electromagnetic interference will not interfere with the operations and performance of the airplane and other components. To do that, they included Band-IT tie-dex bands. Because it can terminate the connections and protect the cables from electromagnetic interference. Through this, they can assure the safety of the person and components. So it will not affect the performance of the airplane.

Band-IT tie-dex provided the best solution for the aircraft industry. In the new technology, the traditional hydro-mechanical controls are replaced by Fly-by-wire systems. Therefore, Passengers can be entertained by TV screens and there are power ports to charge your mobile phones and also, you can use the onboard WiFi system continuously.

Pilot or control tower communications can be disrupted by the electromagnetic interference generated by all these or other electronic devices. Also, these have been suspected of erratic flight deck indications. Band-IT fasteners were using already in the aircraft industries.

Today’s digital control systems need to be designed in anticipation of EMI sources from the outside as well. Solar flares, radar, and lightning – don’t be alarmed, but an airplane is struck by lightning once each year, on average – threaten system performance and jeopardize safety. Maybe Band-IT fasteners can solve it. If not, they can provide a better solution definitely. And, they did it! But how?

Lanyards and rope access

Lanyards and Rope Access

Generally, a lanyard is a strap to carry something such as keys, identity cards... etc. Lanyards are being used from the earlier time. It has many advantages. It can be any type of cord or strap. Any material can be used as a lanyard such as metals, cotton, thread, paper wire or anything.

In the French military, lanyards were used to connect small equipment that is important for their activities. They used lanyards to connect it because of the easiness to use it. They connected their pistols, swords, etc. Because those weapons were important in their work. At any time they need to use it. Therefore it is not possible to put it in a cover or fold it in a box.

By using lanyards it was easy to take out and to use. And another important use of lanyards was to carry their whistle or to connect the whistle to their uniform semi-permanently. It helped secure against fall and it can be dropped without being lost. It is easy to protect something by using a lanyard.

Rope Access

Did you hear about rope access? What is the rope access system and why it is mentioned here along with the lanyard section? What is the relation between rope access systems and lanyards? Ok, let's see the answers for these questions and the relation between rope access and lanyards.

The rope access system is a form of work positioning, to access difficult to reach locations. Because some works need extra activities to reach every corner and edges. For example, It is not easy to reach to all the edges and corners of the tall buildings to clean their window by using scaffoldings. Such situations required rope access.

The relation between rope access and lanyards is, it is an important part of rope access. The equipment kit used for rope access contains lanyards. In rope access system lanyards are used to connect to the main attachment points of the harness.

Band IT clamping solution

Band-IT Clamping Solution

Band-IT's products are providing the best quality and standard. They are one of the top branded organization in the world. There is no compromisation for the quality of the products they offered. However, sometimes, some issues are arising from the client-side. Let's see what are these issues.

Band-IT offers highly qualified fasteners and clamping solutions. However, the price is high for some of the clients.  But that is the one and the only issue for them also. They are highly satisfied with the products, but they are worried about the cost. Because sometimes they have to purchase the item inside from their budgets.

Flexibility pays off for every stakeholder

Band-IT is providing the clamping solution to Epsindo Jaya Pratama. It is an Indonesian company. They are producing oil well submersible pumps. They were a regular customer of Band-IT. But after some time, as a part of cost reduction, they stopped business with Band-IT. They started to purchase the same products made in China.

They could reduce the cost, however, they were not satisfied with the quality. They realized that Band-IT is not getting the price for their product, it is for their quality. The project manager Ng of Band-IT explained that the only issue EJP had with BAND-IT was cost. But they were happy and satisfied with the quality.

However, they realized that the product they purchased from China was not much good and they restarted the business with Band-IT. They approached Band-IT as a partnership base. Mr. Ng negotiated the unit price depends on the number of clamps ordered. Now EJP is using precut Band fast clamps made of stainless steel (304).

Band-IT clamping solutions are secured with seals, clips, ear-lokt buckles or centerpunch clips to meet all the requirements. It can provide all types of solutions to your needs. Therefore, price is not the issue some times.

Rope Access and Carabiner

Rope Access and Carabiner

A Carabiner is a metal-enclosed structure or loop, that can be open on one side. This part is called the gate of the carabiner. The other side will be closed forever. The word carabiner comes from the German word "Karabinerhaken". Its meaning is "hook for a carbine". Normally carabiners are very strong.

Carabiners are used as a part of rope access equipment. Generally, climbing carabiners are very strong. Because these carabiners need to lift heavyweight. Sometimes the weight of the person who is doing climbing activities. However, for each application, this device is manufactured in different quality.

Rope access equipment consists of different equipment used for climbing or other adventurous activities. The carabiner is one of the main parts of it. It is actually a hook or connector which is used to connect two or more other devices. It can be locked or unlocked easily.

To use by a rope access technician, carabiners made as user-friendly. Because while someone is on the rope access activity it is not easy to operate mechanical devices. Therefore each device of the rope access equipment made easy to use but very strong to stay for a long time. All the equipment related to rope access will be included in a rope access equipment kit.

Carabiners are certified for climbing by CE and/or the UIAA.  It is very strong and it will not break when used as intended. A real climbing fall incident will have a force of 5kN at the maximum. But most of the carabiners on rope access or climbing activities are certified for 20kN minimum. They are mentioning it in their optimal direction of use.

A carabiner is available in different forms and shapes, but it's usually a metal oval, with a spring-loaded clip that stays closed unless it's pushed open. Say the word carabiner with an emphasis on the bin syllable, but pronounce it like a bean.

Embossing Works UAE: FAS Arabia 042343772

Embossing Works UAE: FAS Arabia

Embossing works are a part of the artwork. We can emboss letters and numbers on metals. Carving or stamping a design or pattern on a hard surface or object is known as embossing. It projects or stands out in relief. In an earlier time, machines were not available. But embossing was popular and it was done by the art workers.

To do embossing works, there are different types of machines available on the market. Depends on the type of work behavior we can choose the machines required for our embossing works. It can be used for identification purposes. The metal can be varied as per our interest such as stainless steel, brass, aluminum... etc. 

Industrial people are approaching embossing works to get mostly identification tags. they are choosing stainless steel tags to emboss or deboss. Debossing is the process of creating recessed relief images and designs on a surface such as paper and other materials. If the pattern is raised against the background, then it is embossing. the debossed pattern is sunken into the surface of the material.

Another method is imprinting. Tag imprinter is a popular tool. Imprinting means stamping or marking something on a surface. Imprinting and embossing are not the same. As same as embossing, by using imprinter tools also we can do patterns or designs.

As I mentioned before Tag imprinter is popular between industrial people. But tag imprinter and tag embossing we can see commonly on Airports. Because the airport customer service executives are used to pin their name tag on their dresses to assist the people easily. The customers can get their name without asking.

They are used to print their name and designation on the tags or metal plates by using the Tag imprinter tool. Because it will be last for a long time. The cost is less and the reliability is high. Therefore it can be used for years and years.